X-ray Source
Type	Open, microfocus
Max tube voltage	160kV
Max tube current	500μA
Target power	15W
Tube power	65W
Focal spot size	1μm
Flat Panel Detector
Effective area	130mm×130mm
Pixel size	49.5μm
Resolution	1536×1536
Frame rate	20fps
Tiltable angle	60°
Rotation angle	360°
Table
Size	400mm×400mm
Detectable area	400mm×400mm
Max load	10kg
Equipment
Geometry Magnification	2500X
Inspection speed	Max 3.0s/point
Dimensions	1550mm (L) × 1600mm (W) × 1700mm (H)
Weight	1800kg
Power supply	AC110-220V 50/60HZ
Max power	1800W
Industrial PC	I7 CPU,16G RAM, 240GB SSD+1TB HDD
Displayer	24" HDMI LCD
Safety
Radiation leakage	No leakage, international standard: ≤1μSv/h
Lead glass observation window	Transparent lead glass window shields radiation to observe the inner status
Window and back door safety interlock	Once users open the window or back door, X-ray tube powers off immediately. When open, users can't turn on X-ray
Electromagnetic safety switch	Lock once X-ray is on, users can't open observation window
Emergency stop	Next to operation position, press to power off
Tube protection	User can't leave software without closing X-ray tube

Software Function

Function Module	Operation
Function module	Keyboard and mouse can finish all operations
X-ray tube control	Using mouse to click X button turns X-ray on/off. Real-time tube voltage and current display, adjustable via buttons, slider, or typing
Status bar	Indicates interlock status, pre-heat status, and X-ray status by flashing red and green
Image effect adjustment	Brightness, contrast and gain adjustable for optimal image quality
Product list	Save inspection parameters (Z-axis position, brightness, contrast, gain) for efficient re-inspection
Navigation window	After camera takes table photo, click anywhere to move table to that position
Motion axis status	Displays real-time coordinates
Inspection result	Measurement results (voids rate, distance, area, etc.) display in order
Speed control	Movement speed of each axis adjustable to slow, normal and fast
Voids Rate Measurement
Automatic calculation	Click two points to determine rectangle. Software automatically finds and measures solder ball edge, pad, internal voids, providing voids rate, area, circumference, biggest void data with NG/OK indication
Parameters adjustment	Adjust grayscale threshold, pixel, contrast, size filtering for accurate results
Add voids manually	Draw polygon or free figure to calculate as void into void rate
Save parameters	Save measurement parameters for efficient re-detection of same products
Other Measurement Functions
Distance	Click A and B points as baseline, then C point to measure vertical distance from C to baseline
Distance rate	Measure soldering rate of through-hole. Set D point, divide vertical distance from D to baseline by C distance for percentage ratio
Angle	Click A and B points as baseline, then C point to measure angle between BA and BC rays
Radius	Measure round components like solder balls. Click three points to determine circle and measure circumference, area and radius
Perimeter	Measure square components. Click two points to determine square, measure length, width and area
Automatic Inspection
Manual setting	Set any positions as inspection points, software automatically inspects and saves pictures
Array	For regular inspection points, set two points and rows/columns count for automatic inspection
Automatic identification	For inspection points with obvious features, software automatically identifies positions, takes measurements, and saves images