|
| Marka Adı: | WELLMAN |
| Model numarası: | X6000 |
| Moq: | 1 |
| Ödeme şartları: | T/T |
Microfocus X-Ray Inspection System X6000 delivers advanced inspection capabilities with user-friendly operation and robust construction.
| X-ray Source | |
|---|---|
| Type | Closed, microfocus |
| Max tube voltage | 90kV |
| Max tube current | 200μA |
| Focal spot size | 5μm |
| Function | Auto preheat |
| Flat Panel Detector | |
| Effective area | 130mm×130mm |
| Pixel size | 85μm |
| Resolution | 1536×1536 |
| Frame rate | 20fps |
| Table Specifications | |
| Size | 420mm×420mm |
| Detectable area | 400mm×400mm |
| Max load | 15kg |
| Equipment Specifications | |
| Magnification Geometry | 150X |
| System Magnification | 1500X |
| Inspection speed | Max 3.0s/point |
| Dimensions | 1100mm (L)×1000mm (W)×1600mm(H) |
| Weight | 1000kg |
| Power supply | AC110-220V 50/60HZ |
| Max power | 1300W |
| Industrial PC | Intel I5 CPU, 8G RAM, 240GB SSD |
| Displayer | 24"HDMI LCD |
| Function Module | Operation |
|---|---|
| X-ray tube control | Mouse-click operation to turn X-ray on/off with real-time voltage and current display. Adjust via buttons, sliders, or direct input. |
| Status bar | Indicates interlock status, pre-heat status, and X-ray status with alternating red and green indicators. |
| Image effect adjustment | Freely adjust brightness, contrast and gain for optimal image quality. |
| Product list | Save and recall inspection parameters (Z-axis position, brightness, contrast, gain) for efficient repeat inspections. |
| Navigation window | Click anywhere in the table photo to automatically move the table to the selected position. |
| Motion axis status | Display real-time coordinates for precise positioning. |
| Inspection result | Display measurement results (voids rate, distance, area, etc.) in order with pass/fail indicators. |
| Speed control | Adjust movement speed of each axis to slow, normal, or fast settings. |
| Automatic calculation | Define rectangle area to automatically measure solder ball edges, pads, and internal voids with comprehensive data output. |
| Parameters adjustment | Adjust grayscale threshold, pixel, contrast, size filtering and other parameters for accurate automatic calculations. |
| Add voids manually | Draw polygons or free figures to manually include voids in rate calculations. |
| Save parameters | Store parameter sets for efficient reuse with similar products. |
| Distance | Measure vertical distance from point to baseline. |
| Distance rate | Calculate percentage ratios for through-hole soldering rate measurements. |
| Angle | Measure angles between defined rays. |
| Perimeter | Measure length, width and area of square components. |
| Radius | Measure circumference, area and radius of round components. |
| Manual setting | Set custom inspection points for automated inspection and image capture. |
| Array | Automatically inspect regular patterns using row and column definitions. |
| Automatic identification | Software automatically identifies feature-based inspection points, performs measurements, and saves images. |
Video
Video
