As electronic products become smaller, more complex, and more highly integrated, traditional inspection methods are facing increasing challenges. For advanced PCBs, semiconductor packages, BGA/QFN components, and complex solder joints, many critical defects are hidden beneath the surface and cannot be fully evaluated through conventional optical inspection.
This is where industrial 3D CT X-ray inspection is becoming increasingly important.
![]()
Unlike conventional 2D X-ray inspection, which mainly provides a flat projection image, 3D CT inspection reconstructs the internal structure of a sample in three dimensions. This allows manufacturers to examine hidden structures, locate internal defects, perform dimensional measurements, and conduct failure analysis without damaging the product.
For modern electronics manufacturing, 3D CT offers several important advantages:
Non-destructive inspection of internal structures
3D visualization of hidden components and connections
Detection and analysis of internal voids and structural abnormalities
More accurate defect positioning and dimensional measurement
Improved failure analysis and process optimization
As advanced packaging and high-density electronic assembly continue to develop, manufacturers increasingly need inspection solutions that can provide more detailed information about internal product quality.
![]()
![]()
To meet different inspection requirements, the Wellman Micro-Pro 3D CT X-ray Inspection System supports three imaging modes: 2D, 2.5D and 3D.
Each mode is designed for different sample structures and inspection applications.
2D Imaging: Provides conventional X-ray projection images for inspecting internal structures and identifying common defects.
2.5D Imaging: Suitable for large and thin plate-shaped samples. Its detector deflection and rotation imaging module enables multi-angle observation, while multi-axis linkage helps keep the Region of Interest (ROI) unchanged during inspection.
3D CT Imaging: Suitable for detailed internal inspection of smaller and thicker samples, such as semiconductor chips and small PCBs. Through multi-angle scanning and 3D volume reconstruction, users can obtain a more comprehensive view of internal structures.
![]()
Micro-Pro is designed for high-precision industrial inspection and features an open-type X-ray source with a tube voltage range of 20–160 kV.
The system is equipped with an amorphous silicon flat-panel detector featuring a 48 μm pixel size and a 2400 × 3040 pixel matrix.
Its key specifications include:
Maximum sample size: 530 × 530 mm
Maximum imaging area: 510 × 510 mm
Standard JIMA card resolution: 1 μm
Optional JIMA card resolution: 0.5 μm
X-ray tube current range: 20–1000 μA
Detector tilt angle: 70°
These specifications make Micro-Pro suitable for large PCBA inspection, semiconductor packaging analysis and detailed examination of various electronic components.
![]()
In addition to its imaging hardware, Micro-Pro integrates intelligent software capabilities to improve inspection efficiency and simplify complex analysis.
The system combines:
Integrated X-ray scanning software
3D image reconstruction software
3D measurement and analysis software
Image database management software
With AI-assisted image enhancement, automatic analysis, image recognition and scanning programming capabilities, the system helps operators obtain more useful inspection information and improve the efficiency of inspection workflows.
The integrated operation of scanning, reconstruction and automatic recognition also supports a more streamlined inspection process.
![]()
As electronic manufacturing continues to move toward higher integration, smaller components and more complex packaging structures, quality inspection requirements are also evolving.
Manufacturers need more than simple defect detection. They need to understand the location, size and characteristics of internal defects to improve product reliability and optimize manufacturing processes.
This is where 3D CT provides additional value.
By combining multi-mode imaging, high-resolution inspection, 3D reconstruction and intelligent analysis, Wellman Micro-Pro 3D CT X-ray Inspection System provides a comprehensive solution for internal structural inspection.
From large PCBA boards to semiconductor packaging and complex electronic components, Micro-Pro helps manufacturers gain deeper insight into product quality.
Wellman continues to develop advanced X-ray inspection solutions to make inspection more precise and production more intelligent.
As electronic products become smaller, more complex, and more highly integrated, traditional inspection methods are facing increasing challenges. For advanced PCBs, semiconductor packages, BGA/QFN components, and complex solder joints, many critical defects are hidden beneath the surface and cannot be fully evaluated through conventional optical inspection.
This is where industrial 3D CT X-ray inspection is becoming increasingly important.
![]()
Unlike conventional 2D X-ray inspection, which mainly provides a flat projection image, 3D CT inspection reconstructs the internal structure of a sample in three dimensions. This allows manufacturers to examine hidden structures, locate internal defects, perform dimensional measurements, and conduct failure analysis without damaging the product.
For modern electronics manufacturing, 3D CT offers several important advantages:
Non-destructive inspection of internal structures
3D visualization of hidden components and connections
Detection and analysis of internal voids and structural abnormalities
More accurate defect positioning and dimensional measurement
Improved failure analysis and process optimization
As advanced packaging and high-density electronic assembly continue to develop, manufacturers increasingly need inspection solutions that can provide more detailed information about internal product quality.
![]()
![]()
To meet different inspection requirements, the Wellman Micro-Pro 3D CT X-ray Inspection System supports three imaging modes: 2D, 2.5D and 3D.
Each mode is designed for different sample structures and inspection applications.
2D Imaging: Provides conventional X-ray projection images for inspecting internal structures and identifying common defects.
2.5D Imaging: Suitable for large and thin plate-shaped samples. Its detector deflection and rotation imaging module enables multi-angle observation, while multi-axis linkage helps keep the Region of Interest (ROI) unchanged during inspection.
3D CT Imaging: Suitable for detailed internal inspection of smaller and thicker samples, such as semiconductor chips and small PCBs. Through multi-angle scanning and 3D volume reconstruction, users can obtain a more comprehensive view of internal structures.
![]()
Micro-Pro is designed for high-precision industrial inspection and features an open-type X-ray source with a tube voltage range of 20–160 kV.
The system is equipped with an amorphous silicon flat-panel detector featuring a 48 μm pixel size and a 2400 × 3040 pixel matrix.
Its key specifications include:
Maximum sample size: 530 × 530 mm
Maximum imaging area: 510 × 510 mm
Standard JIMA card resolution: 1 μm
Optional JIMA card resolution: 0.5 μm
X-ray tube current range: 20–1000 μA
Detector tilt angle: 70°
These specifications make Micro-Pro suitable for large PCBA inspection, semiconductor packaging analysis and detailed examination of various electronic components.
![]()
In addition to its imaging hardware, Micro-Pro integrates intelligent software capabilities to improve inspection efficiency and simplify complex analysis.
The system combines:
Integrated X-ray scanning software
3D image reconstruction software
3D measurement and analysis software
Image database management software
With AI-assisted image enhancement, automatic analysis, image recognition and scanning programming capabilities, the system helps operators obtain more useful inspection information and improve the efficiency of inspection workflows.
The integrated operation of scanning, reconstruction and automatic recognition also supports a more streamlined inspection process.
![]()
As electronic manufacturing continues to move toward higher integration, smaller components and more complex packaging structures, quality inspection requirements are also evolving.
Manufacturers need more than simple defect detection. They need to understand the location, size and characteristics of internal defects to improve product reliability and optimize manufacturing processes.
This is where 3D CT provides additional value.
By combining multi-mode imaging, high-resolution inspection, 3D reconstruction and intelligent analysis, Wellman Micro-Pro 3D CT X-ray Inspection System provides a comprehensive solution for internal structural inspection.
From large PCBA boards to semiconductor packaging and complex electronic components, Micro-Pro helps manufacturers gain deeper insight into product quality.
Wellman continues to develop advanced X-ray inspection solutions to make inspection more precise and production more intelligent.