|
|
| Marka Adı: | WELLMAN |
| Model numarası: | X-6000 |
| Ödeme şartları: | T/T |
| Category | Specifications |
|---|---|
| X-ray Source | Closed microfocus, 90kV max tube voltage, 200μA max tube current, 5μm focal spot, auto preheat |
| Flat Panel Detector | 130mm*130mm effective area, 85μm pixel size, 1536*1536 resolution, 20fps frame rate |
| Table | 420mm*420mm size, 400mm*400mm detectable area, 15kg max load |
| Equipment | 150X geometry magnification, 1500X system magnification, max 3.0s/point inspection speed |
| Dimensions & Weight | 1100mm(L)*1000mm(W)*1600mm(H), 1000kg |
| Power Supply | AC110-220V 50/60HZ, 1300W max power |
| Configuration | Intel I5 CPU, 8G RAM, 240GB SSD, 24" HDMI LCD display |
| Radiation leakage | No leakage, international standard: ≤1μSv/h |
| Lead glass observation window | Transparent lead glass window shields radiation to observe the inner status |
| Window and back door safety interlock | Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can't turn on the X-ray |
| Electromagnetic safety switch | Lock once the X-ray is on, users can't open the observation window |
| Emergency stop | Next to the operation position, press to power off |
| Tube protection | User can't leave the software if you don't close the X-ray tube |
| Function module | Operation |
|---|---|
| X-ray tube control | Using Keyboard and mouse |
| Status bar | Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green |
| Image effect adjustment | The brightness, contrast and gain of the image can be adjusted freely |
| Product list | Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain |
| Navigation window | The table will move to the place you click and display on the screen |
| Motion axis status | Display real-time coordinates |
| Inspection result | The measurement results (voids rate, distance, area, etc., set by users) display in order |
| Speed control | The movement speed of each axis can be adjusted (slow, normal and fast) |
| Automatic calculation | Click on two points to determine a rectangle |
| Parameters adjustment | Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters |
| Add voids manually | Users can draw a polygon or a free figure and calculate it as a void into the void rate |
| Save parameters | Users can save parameters and can directly save the parameters |
| Distance | Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline |
| Distance rate | It is mostly used to measure the soldering rate of the through-hole |
| Angle | Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays |
| Radius | Click three points to determine a circle and measure the circumference, area and radius |
| Perimeter | Click two points to determine a square, measure the length, width and area |
| Manual setting | Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture |
| Array | Set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures |
| Automatic identification | The software automatically identifies the positions, takes measurements, and saves the image |
Video
Video
Video
Video
Adres
5F,B3, Anda Electronics Sanayi Fabrikası, Heping Topluluğu, Fuhai Caddesi, Baoan Bölgesi, Shenzhen
Televizyon
+86-1840-6666--351
E-posta
sales8@well-man.com
