Advanced microfocus X-ray inspection system designed for industrial quality control applications with intuitive operation and minimal training requirements.

Working Principle

Key Advantages

10,000+ hours long-lifetime closed Hamamastu X-ray tube
Next-generation 5" HD FPD (Flat Panel Detector)
420×420mm worktable with 15KG load capacity
Speed-adjustable 3-axis linkage system
Optional 360° rotary jig
Auto navigation window

Hardware Specifications

X-ray Source

Type	Closed, microfocus
Max Tube Voltage	90kV
Max Tube Current	200μA
Focal Spot Size	5μm

Flat Panel Detector

Effective Area	130mm*130mm
Pixel Size	85μm
Resolution	1536*1536
Frame Rate	20fps

Table Specifications

Size	420mm*420mm
Detectable Area	400mm*400mm
Max Load	15kg

Equipment Parameters

Magnification	Geometry 150X \| System 1500X
Inspection Speed	Max 3.0s/point
Dimensions	1100mm (L) * 1000mm (W) * 1600mm (H)
Weight	1000kg
Power Supply	AC110-220V 50/60HZ
Max Power	1300W
Industrial PC	Intel I5 CPU, 8G RAM, 240GB SSD
Displayer	24" HDMI LCD

Safety Features

Radiation Leakage	No leakage, international standard: ≤1μSv/h
Window and Back Door Safety Interlock	X-ray tube powers off immediately when opened
Electromagnetic Safety Switch	Locks when X-ray is on, preventing window opening
Emergency Stop	Located next to operation position for immediate power cutoff

Software Functions

Core Functions	Concise Operation Instructions
X-ray Tube Control	On/off & Parameter Adjustment - Click the "X" button to start/stop; real-time display of tube voltage/current, adjustable via buttons, sliders or manual input.
Image Optimization	Effect Adjustment - Freely adjust brightness, contrast and gain for clear imaging.
Navigation & Operation	Auto Navigation + Speed Control - One-click positioning by clicking the captured worktable image; 3-speed (slow/normal/fast) adjustment for axes.
Parameter Management	Storage & Retrieval - Save product-specific parameters (Z-axis position, image settings) for quick recall in repeated inspections.
Core Measurement	Voids Rate Measurement - Auto identify and calculate voids rate in solder balls/pads; support parameter adjustment and manual void drawing.
Geometric Measurement	Measure distance, angle, radius, perimeter and through-hole soldering rate for various components.
Automated Inspection	Batch Detection - Support manual/array/auto-feature recognition for inspection points; auto inspect and save images in batches.